Epoxy Grouts
- Home
- Products
- Grouts & Anchors
- Epoxy Grouts
Conbextra EP10(M)
Conbextra EP10(M) is a two part epoxy resin system for grouting gaps ranging from 0.25mm to 10mm. It is an all liquid system consisting of a base and hardener.
Conbextra EP10
Provides a free fl owing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications including : Underplate grouting to substantial structural elements. Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery. Heavy industrial applications in steelworks, refi neries chemical plants and electroplating works. Structural infi ll where very high strength is required. Rail track applications, to support heavy cranes, or on transporter rails.
Conbextra EP 75
Provides a free fl owing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications including : Underplate grouting to substantial structural elements. Base plate grouting in dynamic load situations such as turbines and other reciprocating machinery. Heavy industrial applications in steelworks, refi neries chemical plants and electroplating works. Structural infi ll where very high strength is required. Rail track applications, to support heavy cranes, or on transporter rails.
Conbextra EP 300
Suitable for use where heavy, dynamic or mobile loads are encountered. Particularly well suited to applications where long working time and/or low exotherm properties are required Grouting under reciprocating or rotating equipment Heavy crane/transporter rails High speed turbines and centrifuges Grouting over long distances or in thick sections All applications under conditions of high ambient temperature
Sikadur®-52
Use neat for gravity feed or pressure injection of cracks in structural concrete, masonry, wood, etc. n Seal interior slabs and exterior above grade slabs from water, chlorides and mild chemical attack and to improve wearability.
Sikadur®-55 LP IN
Sikadur®-55 LP IN is a two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin specifically formulated for dry or damp crack sealing. Suitable for use in hot and tropical climatic conditions. Confirms to ASTM C881, Type II and IV, Grade-1, Class F.
Sikadur 42
Sikadur®-42 IN may only be used by experienced professionals. High-strength grouting and fixing of: ▪ Starter bars ▪ Anchors ▪ Fasteners ▪ Tie rods ▪ Crash barrier posts ▪ Fence and railing posts Under-grouting and bedding of: ▪ Base plates Machine bases, seat base plates for light and heavy machinery including heavy impact and vibratory machinery, reciprocating engines compressors, pumps, presses etc. ▪ ▪ Bridge bearings ▪ Mechanical joints (i.e. road / bridge / deck types etc.) Sleeper-less, direct rail fixing of: ▪ Crane tracks ▪ Light rail and permanent way in tunnels ▪ Light rail and permanent way over bridges